Report Content
Chapter 1 Methodology & Scope
1.1 Methodology
1.1.1 Initial data exploration
1.1.2 Statistical model and forecast
1.1.3 Industry Insights and validation
1.1.4 Definitions & assumptions
1.1.5 Forecast parameters & considerations
1.2 Data Sources
1.2.1 Primary
1.2.2 Secondary
Chapter 2 Executive Summary
2.1 Thermal spray coating industry 3600 synopsis, 2013 - 2024
2.1.1 Business trends
2.1.2 Material trends
2.1.3 Process trends
2.1.4 End-use industry trends
2.1.5 Regional trends
Chapter 3 Thermal Spray Coating Industry Insights
3.1 Industry segmentation
3.2 Industry landscape, 2013- 2024
3.3 Industry ecosystem analysis
3.3.1 Distribution channel analysis
3.3.2 Profit margin trends
3.3.3 Vendor matrix
3.4 Technology landscape
3.4.1 Combustion flame
3.4.1.1 Low velocity
3.4.1.2 The High-Velocity Oxygen Fuel (HVOF)
3.4.1.3 Detonation
3.4.2 Electrical energy
3.4.2.1 Two-wire electric arc spraying
3.4.2.2 Plasma spray
3.4.2.3 Cold spray
3.5 Regulatory landscape
3.5.1 North America
3.5.1.1 Spray Finishing Using Flammable and Combustible Materials - Regulations (Standards - 29 CFR) – Standard Number: 1910.107 - Occupational Safety and Health Standards (OSHA)
3.5.1.2 National Emission Standards for Hazardous Air Pollutants: Area Source Standards for Nine Metal Fabrication and Finishing Source Categories - 40 CFR Part 63 - Environmental Protection Agency (EPA)
3.5.1.3 Clean Air Act Amendments of 1990 - Environmental Protection Agency (EPA)
3.5.2 Europe
3.5.2.1 REACH (EC 1907/2006) Regulation – European Chemicals Agency (ECHA) – European Union (EU)
3.5.3 Asia Pacific
3.5.3.1 VOC Regulation of Honk Kong
3.5.3.2 National Industrial Chemicals Notification and Assessment Scheme (NICNAS) – Australia
3.5.4 Latin America
3.5.4.1 Administrative Rule 319 - National Chemical Safety Commission – Brazil
3.5.5 Middle East & Africa
3.5.5.1 Regulation DD-19.0: Hazardous/Dangerous Chemical Storage Warehouse- Saudi Standards, Metrology and Quality Organization (SASO) and Government of Dubai
3.6 Industry best practices & key buying criteria
3.7 Pricing analysis, by region
3.7.1 North America
3.7.2 Europe
3.7.3 APAC
3.7.4 LATAM
3.7.5 MEA
3.7.6 Cost structure analysis
3.8 Innovation & sustainability
3.8.1 Thermal spray of repair and protective coatings
3.8.2 Innovation in the process of thermal spraying coatings by University of Occupational Safety Management, Poland
3.8.3 NASA on Indian made thermal spray coating technology for spacecraft
3.9 Industry impact forces
3.9.1 Growth drivers
3.9.1.1 Shifting trends to attain cost optimization in North American aerospace industry
3.9.1.2 Expansion of European healthcare industry
3.9.1.3 Rising automotive production in APAC
3.9.1.4 Opportunities in the LATAM oil & gas industry
3.9.1.5 Growth in the MEA aviation Industry
3.9.2 Industry pitfall & challenges
3.9.2.1 Emergence of liquid coatings as better substitute
3.9.2.2 Lack of technical expertise
3.10 Global industrial coatings market overview (Parent market outlook)
3.10.1 Global industrial coatings market estimates & forecast, 2013-2024 (USD Billion)
3.10.2 Trends
3.10.3 Consumer requirements
3.11 Growth potential analysis
3.12 Competitive landscape, 2016
3.12.1 Market share analysis, 2016
3.12.2 Key stakeholders
3.12.3 Strategy dashboard
3.12.4 Thermal spray coating suppliers, by region
3.12.5 Thermal spray coating distributors, by region
3.12.6 Thermal spray coating potential customers, by region
3.13 Porter’s analysis
3.14 PESTEL analysis
Chapter 4 Thermal Spray Coating Market, By Material
4.1 Global thermal spray coating market share by material, 2016 & 2024
4.2 Metal
4.2.1 Thermal spray coating market estimates and forecast from metal, 2013 – 2024, (Kilo Tons) (USD Million)
4.2.2 Thermal spray coating market estimates and forecast from metal by region, 2013-2024, (Kilo Tons) (USD Million)
4.2.3. Nickel
4.2.3.1. Market estimates and forecast, 2013 - 2024
4.2.3.2. Market estimates and forecast, by region, 2013 – 2024
4.2.4. Stainless steel
4.2.4.1. Market estimates and forecast, 2013 - 2024
4.2.4.2. Market estimates and forecast, by region, 2013 – 2024
4.2.5. Aluminum
4.2.5.1. Market estimates and forecast, 2013 - 2024
4.2.5.2. Market estimates and forecast, by region, 2013 – 2024
4.2.6. Tribological materials (Stellite, Tribaloy)
4.2.6.1. Market estimates and forecast, 2013 - 2024
4.2.6.2. Market estimates and forecast, by region, 2013 – 2024
4.2.7. Molybdenum
4.2.7.1. Market estimates and forecast, 2013 - 2024
4.2.7.2. Market estimates and forecast, by region, 2013 – 2024
4.2.8. Titanium
4.2.8.1. Market estimates and forecast, 2013 - 2024
4.2.8.2. Market estimates and forecast, by region, 2013 – 2024
4.2.9. Others (Zinc, Copper)
4.2.9.1. Market estimates and forecast, 2013 - 2024
4.2.9.2. Market estimates and forecast, by region, 2013 – 2024
4.3 Polymer
4.3.1 Thermal spray coating market estimates and forecast from polymer, 2013 – 2024, (Kilo Tons) (USD Million)
4.3.2 Thermal spray coating market estimates and forecast from polymer by region, 2013-2024, (Kilo Tons) (USD Million)
4.3.3. Polytetrafluoroethylene (PTFE)
4.3.3.1. Market estimates and forecast, 2013 - 2024
4.3.3.2. Market estimates and forecast, by region, 2013 – 2024
4.3.4. Polyethylene
4.3.4.1. Market estimates and forecast, 2013 - 2024
4.3.4.2. Market estimates and forecast, by region, 2013 – 2024
4.3.5. Polyester
4.3.5.1. Market estimates and forecast, 2013 - 2024
4.3.5.2. Market estimates and forecast, by region, 2013 – 2024
4.3.6. Other
4.3.6.1. Market estimates and forecast, 2013 - 2024
4.3.6.2. Market estimates and forecast, by region, 2013 – 2024
4.4 Ceramics
4.4.1 Thermal spray coating market estimates and forecast from ceramics, 2013 – 2024, (Kilo Tons) (USD Million)
4.4.2 Thermal spray coating market estimates and forecast from ceramics by region, 2013-2024, (Kilo Tons) (USD Million)
4.4.3. Zirconia
4.4.3.1. Market estimates and forecast, 2013 - 2024
4.4.3.2. Market estimates and forecast, by region, 2013 – 2024
4.4.4. Titania
4.4.4.1. Market estimates and forecast, 2013 - 2024
4.4.4.2. Market estimates and forecast, by region, 2013 – 2024
4.4.5. Alumina
4.4.5.1. Market estimates and forecast, 2013 - 2024
4.4.5.2. Market estimates and forecast, by region, 2013 – 2024
4.4.6. Chromia
4.4.6.1. Market estimates and forecast, 2013 - 2024
4.4.6.2. Market estimates and forecast, by region, 2013 – 2024
4.4.7. Yttria
4.4.7.1. Market estimates and forecast, 2013 - 2024
4.4.7.2. Market estimates and forecast, by region, 2013 – 2024
4.4.8. Others (Lanthanum oxide, silicon dioxide)
4.4.8.1. Market estimates and forecast, 2013 - 2024
4.4.8.2. Market estimates and forecast, by region, 2013 – 2024
4.5 Intermetallic
4.5.1 Thermal spray coating market estimates and forecast from intermetallic, 2013 – 2024, (Kilo Tons) (USD Million)
4.5.2 Thermal spray coating market estimates and forecast from intermetallic by region, 2013-2024, (Kilo Tons) (USD Million)
4.5.3. Ti-Al
4.5.3.1. Market estimates and forecast, 2013 - 2024
4.5.3.2. Market estimates and forecast, by region, 2013 – 2024
4.5.4. Ni-Ti
4.5.4.1. Market estimates and forecast, 2013 - 2024
4.5.4.2. Market estimates and forecast, by region, 2013 – 2024
4.5.5. Ni-Al
4.5.5.1. Market estimates and forecast, 2013 - 2024
4.5.5.2. Market estimates and forecast, by region, 2013 – 2024
4.5.6. Fe-Al
4.5.6.1. Market estimates and forecast, 2013 - 2024
4.5.6.2. Market estimates and forecast, by region, 2013 – 2024
4.5.7. Others (Cu-Al-Ni, Ni-Cr)
4.5.7.1. Market estimates and forecast, 2013 - 2024
4.5.7.2. Market estimates and forecast, by region, 2013 – 2024
4.6 Others (alloys, carbides)
4.6.1 Thermal spray coating market estimates and forecast from other materials, 2013 – 2024, (Kilo Tons) (USD Million)
4.6.2 Thermal spray coating market estimates and forecast from other materials by region, 2013-2024, (Kilo Tons) (USD Million)
Chapter 5 Thermal Spray Coating Market, By Process
5.1 Global thermal spray coating market share by process, 2016 & 2024
5.2 Combustion flame
5.2.1 Thermal spray coating market estimates and forecast from combustion flame, 2013 – 2024, (Kilo Tons) (USD Million)
5.2.2 Thermal spray coating market estimates and forecast from combustion flame by region, 2013-2024, (Kilo Tons) (USD Million)
5.2.3. Low velocity
5.2.3.1. Market estimates and forecast, 2013 - 2024
5.2.3.2. Market estimates and forecast, by region, 2013 – 2024
5.2.4. High velocity
5.2.4.1. Market estimates and forecast, 2013 - 2024
5.2.4.2. Market estimates and forecast, by region, 2013 – 2024
5.2.4.3. High velocity oxy-fuel spray (HVOF)
5.2.4.3.1. Market estimates and forecast, 2013 - 2024
5.2.4.3.2. Market estimates and forecast, by region, 2013 – 2024
5.2.4.4. High velocity air-fuel spray (HVAF)
5.2.4.4.1. Market estimates and forecast, 2013 - 2024
5.2.4.4.2. Market estimates and forecast, by region, 2013 – 2024
5.2.4.5. High-volume low-pressure spray (HVLP)
5.2.4.5.1. Market estimates and forecast, 2013 - 2024
5.2.4.5.2. Market estimates and forecast, by region, 2013 – 2024
5.2.5. Detonation
5.2.5.1. Market estimates and forecast, 2013 - 2024
5.2.5.2. Market estimates and forecast, by region, 2013 – 2024
5.3 Electrical energy
5.3.1 Thermal spray coating market estimates and forecast from electrical energy, 2013 – 2024, (Kilo Tons) (USD Million)
5.3.2 Thermal spray coating market estimates and forecast from electrical energy by region, 2013-2024, (Kilo Tons) (USD Million)
5.3.3. Two-wire electric arc spraying
5.3.3.1. Market estimates and forecast, 2013 - 2024
5.3.3.2. Market estimates and forecast, by region, 2013 – 2024
5.3.4. Plasma spraying
5.3.4.1. Market estimates and forecast, 2013 - 2024
5.3.4.2. Market estimates and forecast, by region, 2013 – 2024
5.3.5. Cold spray
5.3.5.1. Market estimates and forecast, 2013 - 2024
5.3.5.2. Market estimates and forecast, by region, 2013 – 2024
Chapter 6 Thermal Spray Coating Market, By End-Use Industry
6.1 Global thermal spray coating market share by end-use industry, 2016 & 2024
6.2 Aerospace & defense
6.2.1 Thermal spray coating market estimates and forecast from aerospace & defense, 2013 – 2024, (Kilo Tons) (USD Million)
6.2.2 Thermal spray coating market estimates and forecast from aerospace & defense by region, 2013-2024, (Kilo Tons) (USD Million)
6.2.3. Turbine blades
6.2.3.1. Market estimates and forecast, 2013 - 2024
6.2.3.2. Market estimates and forecast, by region, 2013 – 2024
6.2.4. Flame tubes
6.2.4.1. Market estimates and forecast, 2013 - 2024
6.2.4.2. Market estimates and forecast, by region, 2013 – 2024
6.2.5. HPT outer stationery seal
6.2.5.1. Market estimates and forecast, 2013 - 2024
6.2.5.2. Market estimates and forecast, by region, 2013 – 2024
6.3 Automotive
6.3.1 Thermal spray coating market estimates and forecast from automotive, 2013 – 2024, (Kilo Tons) (USD Million)
6.3.2 Thermal spray coating market estimates and forecast from automotive by region, 2013-2024, (Kilo Tons) (USD Million)
6.3.3. Turbochargers
6.3.3.1. Market estimates and forecast, 2013 - 2024
6.3.3.2. Market estimates and forecast, by region, 2013 – 2024
6.3.4. Oxygen sensors
6.3.4.1. Market estimates and forecast, 2013 - 2024
6.3.4.2. Market estimates and forecast, by region, 2013 – 2024
6.3.5. Alternator covers
6.3.5.1. Market estimates and forecast, 2013 - 2024
6.3.5.2. Market estimates and forecast, by region, 2013 – 2024
6.4 Healthcare
6.4.1 Thermal spray coating market estimates and forecast from healthcare, 2013 – 2024, (Kilo Tons) (USD Million)
6.4.2 Thermal spray coating market estimates and forecast from healthcare by region, 2013-2024, (Kilo Tons) (USD Million)
6.4.3. Medical products packaging
6.4.3.1. Market estimates and forecast, 2013 - 2024
6.4.3.2. Market estimates and forecast, by region, 2013 – 2024
6.4.4. Instrument coating
6.4.4.1. Market estimates and forecast, 2013 - 2024
6.4.4.2. Market estimates and forecast, by region, 2013 – 2024
6.5 Energy & power
6.5.1 Thermal spray coating market estimates and forecast from energy & power, 2013 – 2024, (Kilo Tons) (USD Million)
6.5.2 Thermal spray coating market estimates and forecast from energy & power by region, 2013-2024, (Kilo Tons) (USD Million)
6.5.3. Industrial gas, steam & water turbines
6.5.3.1. Market estimates and forecast, 2013 - 2024
6.5.3.2. Market estimates and forecast, by region, 2013 – 2024
6.5.4. Pumps & shafts
6.5.4.1. Market estimates and forecast, 2013 - 2024
6.5.4.2. Market estimates and forecast, by region, 2013 – 2024
6.6 Electronics
6.6.1 Thermal spray coating market estimates and forecast from electronics, 2013 – 2024, (Kilo Tons) (USD Million)
6.6.2 Thermal spray coating market estimates and forecast from electronics by region, 2013-2024, (Kilo Tons) (USD Million)
6.6.3. Semiconductor capital equipment
6.6.3.1. Market estimates and forecast, 2013 - 2024
6.6.3.2. Market estimates and forecast, by region, 2013 – 2024
6.6.4. Dielectric coatings
6.6.4.1. Market estimates and forecast, 2013 - 2024
6.6.4.2. Market estimates and forecast, by region, 2013 – 2024
6.7 Agricultural machinery
6.7.1 Thermal spray coating market estimates and forecast from agricultural machinery, 2013 – 2024, (Kilo Tons) (USD Million)
6.7.2 Thermal spray coating market estimates and forecast from agricultural machinery by region, 2013-2024, (Kilo Tons) (USD Million)
6.7.3. Agricultural threshing equipment
6.7.3.1. Market estimates and forecast, 2013 - 2024
6.7.3.2. Market estimates and forecast, by region, 2013 – 2024
6.7.4. Turbo compressors
6.7.4.1. Market estimates and forecast, 2013 - 2024
6.7.4.2. Market estimates and forecast, by region, 2013 – 2024
6.8 Others (Paper, marine, textile & chemical)
6.8.1 Thermal spray coating market estimates and forecast from other industries, 2013 – 2024, (Kilo Tons) (USD Million)
6.8.2 Thermal spray coating market estimates and forecast from other industries by region, 2013-2024, (Kilo Tons) (USD Million)
Chapter 7 Thermal Spray Coating Market, By Region
7.1 Global thermal spray coating market share by region, 2016 & 2024
7.2 North America
7.2.1 North America market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.2.2 North America market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.2.3 North America market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.2.4 North America market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.2.5 U.S.
7.2.5.1 U.S. market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.2.5.2 U.S. market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.2.5.3 U.S. market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.2.5.4 U.S. market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.2.6 Canada
7.2.6.1 Canada market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.2.6.2 Canada market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.2.6.3 Canada market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.2.6.4 Canada market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3 Europe
7.3.1 Europe market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.2 Europe market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.3 Europe market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.4 Europe market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.5 Germany
7.3.5.1 Germany market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.5.2 Germany market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.5.3 Germany market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.5.4 Germany market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.6 UK
7.3.6.1 UK market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.6.2 UK market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.6.3 UK market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.6.4 UK market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.7 France
7.3.7.1 France market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.7.2 France market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.7.3 France market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.7.4 France market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.8 Italy
7.3.8.1 Italy market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.8.2 Italy market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.8.3 Italy market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.8.4 Italy market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.9 Russia
7.3.9.1 Russia market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.9.2 Russia market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.9.3 Russia market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.9.4 Russia market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.3.10 Poland
7.3.10.1 Poland market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.3.10.2 Poland market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.3.10.3 Poland market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.3.10.4 Poland market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4 Asia Pacific
7.4.1 Asia Pacific market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.2 Asia Pacific market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.3 Asia Pacific market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.4 Asia Pacific market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4.5 China
7.4.5.1 China market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.5.2 China market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.5.3 China market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.5.4 China market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4.6 India
7.4.6.1 India market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.6.2 India market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.6.3 India market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.6.4 India market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4.7 Japan
7.4.7.1 Japan market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.7.2 Japan market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.7.3 Japan market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.7.4 Japan market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4.8 South Korea
7.4.8.1 South Korea market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.8.2 South Korea market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.8.3 South Korea market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.8.4 South Korea market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.4.9 Australia
7.4.9.1 Australia market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.4.9.2 Australia market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.4.9.3 Australia market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.4.9.4 Australia market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.5 Latin America
7.5.1 Latin America market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.5.2 Latin America market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.5.3 Latin America market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.5.4 Latin America market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.5.5 Brazil
7.5.5.1 Brazil market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.5.5.2 Brazil market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.5.5.3 Brazil market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.5.5.4 Brazil market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.5.6 Argentina
7.5.6.1 Argentina market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.5.6.2 Argentina market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.5.6.3 Argentina market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.5.6.4 Argentina market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.5.7 Mexico
7.5.7.1 Mexico market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.5.7.2 Mexico market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.5.7.3 Mexico market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.5.7.4 Mexico market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.6 Middle East & Africa
7.6.1 Middle East & Africa market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.6.2 Middle East & Africa market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.6.3 Middle East & Africa market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.6.4 Middle East & Africa market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.6.5 Saudi Arabia
7.6.5.1 Saudi Arabia market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.6.5.2 Saudi Arabia market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.6.5.3 Saudi Arabia market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.6.5.4 Saudi Arabia market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.6.6 UAE
7.6.6.1 UAE market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.6.6.2 UAE market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.6.6.3 UAE market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.6.6.4 UAE market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
7.6.7 South Africa
7.6.7.1 South Africa market estimates and forecast, 2013 – 2024, (Kilo Tons) (USD Million)
7.6.7.2 South Africa market estimates and forecast, by material, 2013-2024, (Kilo Tons) (USD Million)
7.6.7.3 South Africa market estimates and forecast, by process, 2013-2024, (Kilo Tons) (USD Million)
7.6.7.4 South Africa market estimates and forecast, by end-use industry, 2013-2024, (Kilo Tons) (USD Million)
Chapter 8 Company Profiles
8.1 A&A Thermal Spray Coatings
8.1.1 Business Overview
8.1.2 Product Landscape
8.1.3 SWOT Analysis
8.2 Flame Spray Coating Co.
8.2.1 Business Overview
8.2.2 Product Landscape
8.2.3 SWOT Analysis
8.3 General Magnaplate Corporation
8.3.1 Business Overview
8.3.2 Product Landscape
8.3.3 SWOT Analysis
8.4 Praxair Surface Technologies
8.4.1 Business Overview
8.4.2 Financial Data
8.4.3 Product Landscape
8.4.4 Strategic Outlook
8.4.5 SWOT Analysis
8.5 Oerlikon Metco
8.5.1 Business Overview
8.5.2 Financial Data
8.5.3 Product Landscape
8.5.4 Strategic Outlook
8.5.5 SWOT Analysis
8.6 Plasma-Tec
8.6.1 Business Overview
8.6.2 Product Landscape
8.6.3 SWOT Analysis
8.7 Surface Technology
8.7.1 Business Overview
8.7.2 Product Landscape
8.7.3 Strategic Outlook
8.7.4 SWOT Analysis
8.8 H.C. Starck GmbH
8.8.1 Business Overview
8.8.2 Product Landscape
8.8.3 Strategic Outlook
8.8.4 SWOT Analysis
8.9 ASB Industries
8.9.1 Business Overview
8.9.2 Product Landscape
8.9.3 SWOT Analysis
8.10 Metallisation Ltd.
8.10.1 Business Overview
8.10.2 Financial Data
8.10.3 Product Landscape
8.10.4 SWOT Analysis
8.11 MesoCoat, Inc. Coating
8.11.1 Business Overview
8.11.2 Product Landscape
8.11.3 Strategic Outlook
8.11.4 SWOT Analysis
8.12 Cincinnati Thermal Spray Inc.
8.12.1 Business Overview
8.11.2 Product Landscape
8.11.3 Strategic Outlook
8.11.4 SWOT Analysis
8.13 Thermion Inc.
8.13.1 Business Overview
8.13.2 Product Landscape
8.13.3 SWOT Analysis
8.14 Air Products and Chemicals, Inc.
8.14.1 Business Overview
8.14.2 Financial Data
8.14.3 Product Landscape
8.14.4 SWOT Analysis
8.15 Bodycote PLC
8.15.1 Business Overview
8.15.2 Financial Data
8.15.3 Product Landscape
8.15.4 Strategic Outlook
8.15.5 SWOT Analysis
8.16 Saint-Gobain
8.16.1 Business Overview
8.16.2 Financial Data
8.16.3 Product Landscape
8.16.4 Strategic Outlook
8.16.5 SWOT Analysis
8.17 Sandvik AB
8.17.1 Business Overview
8.17.2 Financial Data
8.17.3 Product Landscape
8.17.4 SWOT Analysis
