Bicycle Hydraulic Disc Brake Market
Get a free sample of this report
Your inquiry has been received. Our team will reach out to you with the required details via email. To ensure that you don't miss their response, kindly remember to check your spam folder as well!
Form submitted successfully!
Error submitting form. Please try again.
Request Sectional Data
Your inquiry has been received. Our team will reach out to you with the required details via email. To ensure that you don't miss their response, kindly remember to check your spam folder as well!
Form submitted successfully!
Error submitting form. Please try again.
The global bicycle hydraulic disc brake market was valued at USD 1.8 billion in 2024 and is projected to grow at a CAGR of 4.6% between 2025 and 2034. The increase in the utilization of electric bicycles (e-bikes) propels the expansion of the market. E-bikes, which are heavier and faster than conventional bicycles, necessitate reliable and efficient braking systems.
In urban cities and steep regions, e-bikes are ideal because they have superior stopping power, high reliability, and are equipped with good heat dissipation systems. Electric bicycles are shifting the focus towards e-mobility solutions, which enables the bicycle market to grow due to an increased concern for sustainable transport solutions. Hence, the manufacturing of electric bicycles is ramping up to meet the increased global market demand. Furthermore, the requirement of e-bikes using efficient hydraulic disc brakes increases just like in any other vehicles, contributing to the general growth of the hydraulic braking systems market.
Report Attribute | Details |
---|---|
Base Year: | 2024 |
Bicycle Hydraulic Disc Brake Market size in 2024: | USD 1.8 Billion |
Forecast Period: | 2025 - 2034 |
Forecast Period 2023 - 2032 CAGR: | 4.6 |
2023 Value Projection: | USD 2.6 Billion |
Historical Data for: | 2021 - 2024 |
No of Pages: | 180 |
Tables, Charts & Figures: | 200 |
Segments Covered: | Product, Material, Bicycle, Sales Channel |
Growth Drivers: |
|
Pitfalls Challenges: |
|
Enhanced performance and safety are some of the key elements that are driving the growth of the bicycle hydraulic disc brake market. Users tend to favor these types of brakes over the other types due to their supreme stopping ability, the ability of precise modulation, and effective performance in different environmental conditions, including wet and mud. These characteristics make them the go-to brakes for mountain bikers, professional cyclists, and electric bike riders who need reliable braking in harsh scenarios.
Factors like these, for example, the increased consumer preference for tighter stopping distances along with control, influence this consumer preference to choose these brakes over the other types. As cycling enthusiasts are inclined toward these particular features, the need for hydraulic disc brakes is increasing tremendously.
Cycling is not static, and with the advent of technology, bicycle hydraulic disc brakes are turning out to be an excellent in-depth advance in the technology of a bicycle system of brakes. Improved brake liquid systems, piston systems, rotor materials, etc., add up to greater stopping performance by providing more effective control, more efficient heat dissipation, and increased stopping power.
At the same time, self-confidence while riding is greatly enhanced. Their use is especially useful in more demanding sports such as downhill mountain biking or in wet weather. Additionally, the creation of lighter, more effective brake systems improves their application possibilities to a broader scope of bicycles, including electric bikes, as well as performance ones for road bikes.
Reduced maintenance requirements are much appreciated by both professional cyclists and amateur riders, rendering the devices convenient. The rise of expectations from a consumer when it comes to increased ability, safety, and overall structure leads to ongoing speculations that a tech improvement on the systems will further ceramic hydraulic disc brakes and sustain global market growth.
For example, in September 2024, Galfer USA presented its new Floating Wave Rotors products intended for mountain, road, and gravel bicycles for the year 2024. The rotors are a two-part unit, which helps endure better stabilization of strength while allowing for a significant weight drop. These Floating Wave Rotors are 6-bolt types and come in two variations: 180mm and 203mm, thus supporting a wide range of bikes. The rotor blades are made to contact the brake pads at an angle to allow for greater control and modulation of the braking.
On the other hand, the bicycle hydraulic disc brake market is inhibited chiefly by the relatively high price of hydraulic disc brakes when compared to traditional rim brakes on a bicycle. These systems use modern technology, expert craftsmanship, and quality materials, which raise production costs. This brand loyalty premium price inhibits a lot of consumers, especially those from developing nations where prices do really matter.
In addition, bicycles with hydraulic disc brakes have a negative stigma because they are seen as too expensive, so their target market only segments that can be called professional riders or cycling passionate. Increasing maintenance costs along with the lack of proper expertise in the market makes the situation worse for leisure cyclists.
Based on the product, the market is segmented into two-piston hydraulic disc brakes, and four-piston hydraulic disc brakes. In 2024, the two-piston hydraulic disc brakes segment accounted for over 60% of the bicycle hydraulic disc brake market share and is expected to exceed USD 1.5 billion by 2034.
Based on sales channels, the market is divided into OEMs, and aftermarket. The OEMs segment held around 68% of the bicycle hydraulic disc brake market share in 2024.
In 2024, the Asia Pacific region accounted for a market share of over 40% and is expected to exceed USD 1 billion by 2034. China leads the bicycle hydraulic disc brake market in the Asia Pacific region and is expected to exceed USD 500 million by 2034.
Shimano Inc., SRAM LLC, and Campagnolo collectively held a substantial market share of over 16% in the bicycle hydraulic disc brake industry in 2024.
Major players operating in the bicycle hydraulic disc brake industry are:
In order to boost performance, safety, and durability, market leaders are trying to incorporate modern software into advanced materials, modular structures, and electronic braking systems. Development is also being done in adjustable braking pressure, heat dissipation, and wireless brake actuation to improve user experience. Such approaches are important in the expanding e-bike and high-performance bicycle markets, where the separation of effective braking from the rest of the components is becoming increasingly important.
The bicycle hydraulic disc brake market is very competitive because of large international manufacturers with global production scale and regional manufacturers with economical or specialized products. International corporations have the upper hand in this market because they provide excellent and expensive braking systems to professional cyclists and high-end bicycles. These companies focus on winning contracts with sizable bicycle manufacturers and distributors due to their excellent research and development, distribution networks, and prominent brands.
Market, By Product
Market, By Material
Market, By Bicycle
Market, By Sales Channel
The above information is provided for the following regions and countries:
The key players in the industry include Campagnolo, Hayes Performance Systems, Hope Technology, Kobelt Manufacturing, Magura, Shimano, SR Suntour, SRAM, Tektro, and TRW Automotive.
The market size of bicycle hydraulic disc brake reached USD 1.8 billion in 2024 and is set to grow at a 4.6% CAGR from 2025 to 2034, led by the increasing adoption of electric bicycles (e-bikes) requiring advanced braking systems for safety and control.
The Asia Pacific market held a 40% revenue share in 2024 and is anticipated to surpass USD 1 billion by 2034, led by China's position as a global manufacturing hub for bicycles and related components.
The OEMs segment accounted for 68% of the market share in 2024, as they equip new bicycles, particularly high-end models like mountain bikes, road bikes, and e-bikes, with advanced hydraulic disc brakes to enhance safety and functionality.